ARROW 100W VARIABLE WATTAGE VW APV BOX MOD - Grey, ALUMINUM, 2 X 18650, 7~100W

Variable Wattage from 7W to 100W in 0.1 watt increment;

How to use Arrow mod:

1. When the mod equipped with batteries, the OLED screen will light up. The screen will display the output wattage, battery level, output voltage and resistance after pressing any button to turn on the mod.

2. The OLED screen will dim after 15 seconds if there is no operation. The mod will turn to sleep mode if there is no operation during 1 minute.

3. When equipped with atomizer, the mod will check the resistance of it when pressing the fire button. The resistance will be 0.00 if there is no atomizer.

4. Pressing the fire button 5 times continuously within 7 seconds will turn to locked mode. When the mod is locked, the screen will display LOCKED CLICK 5X if pressing any button once. Then press 5 times the fire button will unlock the mod.

5. Press the Up/Down button to increase or decrease the output wattage. Adjustment range is 7W-80W/100W, 0.1W each time.

6. The maximum output voltage is 13V and minimum is 1.1V when vaping.

Function Description:

1. Over-current protection: The screen will display SHORTED when the output current is over 25A.

2. If the mod keep working over 30 seconds just one click the fire button, it will stop working for 3 seconds every 20 seconds when the wattage during 1~60W. And stop working for 3 seconds every 5 seconds if it is over 60W.

3. Short circuit protection-The mod will show SHORTED if the heating coil is short circuit and it will stop working at the same time.

4. Low/high resistance protection-The screen will display CHECK ATOMIZE if the resistance of atomizer is under 0.20 ohm or over 3.3 ohm. It will show SHORTED if the resistance is 0.2~0.3 ohm. Suitable resistance is 0.3~3.3 ohm.

5. Low voltage protection-When pressing the fire button the battery signal will flash and the device will stop working if the VBAT <=5.8V +/- 0.1V. Under the standby mode, the battery signal will flash several times and the mod will be power off if not charged when the VBAT <=6.4V +/- 0.1V.

6. Over temperature protection-It will display OVER TEMPERATURE and stop working for 15 seconds when its check point is over 65'C.

7. Hiding mode-When under the locked mode, press the Fire button and Down button at the same time for 5 seconds, the mod will turn to hiding mode then the screen will stay off but will still show the warning information. Press the Fire button and Down button for 5 seconds again will turn to normal mode.

8. When under the locked mode, press the Fire button and Up button at the same time for 5 seconds, the message on the screen will turn around. Suitable for using by both right or left hand.

9. Press the Up and Down button at the same time for 2 seconds, the wattage will remain the same when you press the Up and Down button but under this mode it can still work if you press the Fire button. Press the Up and Down button at the same time for 2 seconds will exit this mode.

How to charge:

Connect the standard Micro-USB line with the mod to charge. Under the charging mode, the battery signal will flash all the time till it full of power.

 

3FVape is a professional electronic cigarette retail and wholesale shop. We provide new and cool e-cig products at affordable price. All products will be shipped from China now. If you find a product to be authentic, then it is not a clone. For any question about product title ARROW 100W VARIABLE WATTAGE VW APV BOX MOD - Grey, ALUMINUM, 2 X 18650, 7~100W, please contact us. We also encourage you to leave review of e-cig products on 3FVape.

 

Discounted at only: US$ 59.86