Phimis VW Variable Wattage APV Box Mod - Blue, Stainless Steel, 7~50W, 1 x 18650, Wireless Charge

Specification
Output Power: 7 Watts to 50 Watts;
Output Voltage: 2.0 Volts to 9.5Volts;
Output Current: 25.0A;
Atomizer Resistance: 0.2 ohms to 3.0 ohms (typical: 1.5 ohms);
Bypass (Direct Connection Mode): YES;
Output Power (Bypass mode): 7 Watts (3 ohm), 50 Watts (0.2 ohm);
Output Voltage (Bypass mode): Battery Voltage: 0.09V;
Output Current (Bypass mode): 1.5A;
Input Voltage (Battery Required above 25A): 3.3 Volts to 4.5 Volts (typical: 3.7 Volts);
Input Current: 1.5A to 25A (typical: 10A);
Screen On Current: 25mA;
Quiescent Current: 1mA;
Power Down Current: 250uA;
Efficiency: 90%;
Screen Size: 0.69" OLED;
Fire Method: Only One Regular Fire Button;
Adjust Power Method: Up/Down Button Adjust The Power;
USB Charging for Battery: Yes 1A;
Software Upgraded/GUI operate: YES;

Protection
1. Reverse Polarity Protection;
2. Output Short Protection;
3. Low Resistance Protection;
4. Battery Low Voltage Protection ;
5. Battery High Voltage Protection;
6. Temperature Protection;

Input: DC 5V, 1000mA;
Variable wattage: wattage can be variable from 7W to 50W in 0.1W increment;
Atomizer resistance: 0.2~3 ohm;
Powered by 1 x 18650 battery (not included);
It will stop working automatically once push the fire button for 10s.

How to charge:
1. Micro USB charger;
2. Take out the battery;
3. Wireless charge (charger is not included)

Method of Application:

1. Use a screwdriver to take out the bottom cap;
2. Put one 18650 battery into the box and close the bottom cap;
3. Power on, LED shows the number;
4. Adjustment on wattage: In the state of the buttons being unlocked, when pressing the power button "-" and "+". The output wattages will increase or decrease 0.1W when pressing "-" or "+".
5. It will be standby mode when battery is inside the box.

Function:
You can press "+" and "-" at the same time and hold for 5 seconds, then the function of "+" and "-" will became not usable, LCD shows POWER LOCKED.
Adversely, if you want the "+"and "-" function, just press the both buttons for 5 seconds again, then the button +and " will became usable.
Press the fire button for 5 times, LCD shows NO/OFF.

 

3FVape is a professional electronic cigarette retail and wholesale shop. We provide new and cool e-cig products at affordable price. All products will be shipped from China now. If you find a product to be authentic, then it is not a clone. For any question about product title Phimis VW Variable Wattage APV Box Mod - Blue, Stainless Steel, 7~50W, 1 x 18650, Wireless Charge, please contact us. We also encourage you to leave review of e-cig products on 3FVape.

 

Discounted at only: US$ 55.99